The Alocit 28 Series is a range of high build, zero VOC coatings with outstanding adhesive and protective qualities even when used in the splash zone or underwater
Alocit's long life and ability to succeed in difficult circumstances has made it the coating of choice for protecting challenging substrates such as sweating pipes on refineries in the tropics and dripping wet bridges in northern hemisphere winters.
But Alocit is not just for wet surfaces, it can be applied to concrete, steel and many other substrates – in the dry, in the wet or on oil-soaked concrete.
The list of potential applications is as long as that of its satisfied customers, who include some of the best-known companies in the world.
Alocit coatings are consistently top of the tables in comparison tests on problem substrates. Tests by the US Navy after coating bilge areas showed adhesion beyond the range of their testing equipment and Alocit 28.15 is one of only three coatings listed by the USACE as meeting its specifications for application on wet surfaces. Comparison tests for Shell on cold, sweating pipes in Texas showed Alocit's clear superiority and testing for use after water jetting produced adhesion results nearly twice as good for Alocit as its closest competitor!
Alocit products have a long history of successful applications. Testimonials and case histories show that coating applications from 1968 are still intact well into the 21st century - despite a lifetime of exposure to aggressive waste products.
Applying
underwater on
steel pipe
Safe to use in environmentally sensitive areas
-
Easy to use, long-lasting abrasion-resistant finish for concrete & steel
-
For protection of steel structures, industrial floors, cellars, bund/storage containment areas, sheet piles, locks & channels, docks, harbors, oil rigs, oil tanks, hulls & bilges, bridges, industrial plant, rail & subway tunnels, underpasses, swimming pools etc.
-
Can be used as self-priming coat on minimal surface prep.
-
Resistant to many alkalis, some acids, oils, sewage, mechanical wear and chemical attack
-
Apply on dry, wet, oily or underwater surfaces
-
High build (200 - 400 microns/8-16 mil) per coat